Looking for a different classroom?



Return to "What's In My Classroom?"

Photos Photos

Minimize
Click on any image below to zoom
 
OM 408 seats 28 students.

 
OM 408 is equipped with two chalkboards.

 
Lighting controls are located next to the door.

 
Additional lighting controls, along with a phone, are located on the wall behind the lectern.

 


Updated: 8/19/2019

Old Main 408 Level 3 Old Main 408 Level 3

Minimize
Equipment   Room Features
• Crestron Touch Panel Interface
• Ceiling-mounted LCD projector
• Windows computer
• Document camera (click here for more info)
• Blu-ray player

• Ability to connect a presenter's laptop
• Auxiliary inputs (HDMI and composite video/audio)
• Pull-down projection screen
 

• Seats 28
• Tablet arm desks (movable)
Light switches by door & behind lectern
Internet and network access
• Phone (wall-mounted behind lectern)
• Chalkboards (front & hallway walls)


Powering Up the Equipment
The equipment is controlled from the lectern using a Crestron Touch Panel Interface.

Click on the image below to zoom   Click on the image below to zoom
 
Instructor's lectern   Crestron Touch Panel


If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter the required Access Code (63520).

 


After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait...Projector will be ready in: **". Once the projector is ready, the Crestron will display the Main Menu, further identifying the function of the hard-buttons.

 


The resident computer and document camera are powered on using the appropriate button located on each device.


Projector Standby (PIC-MUTE)
Each source page (COMPUTER, LAPTOP, DOCUMENT CAMERA, BLU-RAY & AUX) has a Projector Standby button located in the lower left corner of the screen. Pressing this button once will place the projector in standby (or pic-mute) mode; no image will be seen on the projection screen and room audio will be muted. While this mode is active, the button will flash.

Simply press the button again to take the projector out of standby mode and unmute room audio.


Volume
Each source page (COMPUTER, LAPTOP, DOCUMENT CAMERA, BLU-RAY, & AUX) has a volume control section located on the right side of the screen. Volume up, down, and mute controls are provided.

NOTE: Computers have their own volume controls which may need to be adjusted separately.


Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on.
OM 408 is equipped with a rack-mounted HP computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the COMPUTER button on the Crestron to display the appropriate touch-screen controls.

    Click on the image below to zoom
 
The computer is located in the rack    

 


Document Camera (ELMO)
The Doc Cam's power and lights must be turned on manually using the controls located on the camera itself. Click
here for more information regarding the document camera found in this classroom.

Once the camera's power is on, press the DOC CAM button on the Crestron to display the appropriate touch-screen controls.

Click on the image below to zoom

 


Blu-ray or DVD Playback (via the Blu-ray player)
Press the OPEN/CLOSE button on the Blu-ray player and insert your disc (DVD or Blu-ray) into the disc tray. Press the BLU-RAY button on the Crestron to display the appropriate touch-screen controls.

Click on the image below to zoom   Click on the image below to zoom
 
The Blu-ray player is in the rack    


Touch-buttons are provided which allow you to control the Blu-ray player from the Crestron. The only time you ever touch the Blu-ray player itself is to insert or eject your disc.

Looking to access the menu screen of your DVD or Blu-ray?

Blu-ray: Press the POP-UP touch-screen button to access the disc's menu.

DVD: Press the OPTION touch-screen button to access the Blu-ray player's on-screen menu.

Click on the image below to zoom


The "Operation Menu" icon should already be highlighted. Press ENTER on the Crestron and then scroll down until "Menu" is selected and press ENTER.


Connecting a Laptop
The cables needed for connecting a laptop computer are found on the instructor's lectern (under the hatch). In addition to cables for connecting a laptop, a power outlet is also located under the hatch for your convenience.

Using the VGA cable   Using the HDMI cable
     
1. Plug the VGA cable into your laptop's VGA port. 1. Plug the HDMI cable into your laptop's HDMI port.
   
2. Plug the Ethernet cable into your laptop's network jack (if needed).  2. Plug the Ethernet cable into your laptop's network jack (if needed).
    
3. Plug the audio cable into your laptop's headphone jack.  3. Press the AUX button on the Crestron.
    
4. Press the LAPTOP button on the Crestron to view the "Laptop" screen. 4. Press the "HDMI" touch-screen button on the "Auxiliary Inputs" screen.
   
5. Turn on your laptop's power. 5. Turn on your laptop's power.
   
6. If needed, set your laptop to display on a secondary display. 6. If needed, set your laptop to display on a secondary display.
   
Click on the image below to zoom


Don't have a VGA or HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.


Auxiliary Video Inputs
Use the external Audio/Video cables located on the instructor's lectern (under the hatch) t
o display images from a video camera or other external device; HDMI and composite audio/video cables are provided.

After connecting your device with the appropriate cables, press the AUX button on the Crestron to display the appropriate touch-screen controls.

Click on the image below to zoom


Touch-buttons are provided which allow you to select your external device for playback in the room.


Powering Down the Equipment
Press the SHUTDOWN button on the Crestron to display the appropriate touch-screen controls. Press the green "YES" button to proceed with shutdown or the red "NO" button to cancel.

 


The resident computer and document camera must be powered off separately. Instructions for shutting down the computer are found below.

Be sure to remove any media from the equipment before shutting it down.


Powering Down the Resident Computer Powering Down the Resident Computer

Minimize

1. Open the Start Menu (click on in the lower-left corner).

2. Click the "Shut Down" button.


Staging Enabled