Looking for a different classroom?



Return to "What's In My Classroom?"

Photos Photos

Minimize
Click on any image below to zoom
 
OM 111 seats 24 students.

 
OM 111 is equipped with multiple displays.

 
Lighting controls are located next to the door.

 
Additional lighting controls, along with a phone, are located on the wall behind the lectern.

 


Updated: 2/6/2016

The bottom left LCD TV was removed this morning to be repaired. The lower right TV has been moved over to its place.

Please contact Bob Grabowski at ext. 3278 if you have any questions.

Old Main 111 (Financial Markets Lab) - Level 4 Classroom - Seats 24 Old Main 111 (Financial Markets Lab) - Level 4 Classroom - Seats 24

Minimize
Equipment   Room Features
• Crestron Touch Panel Interface
• Wall-mounted LCD projector
• Windows computer
• SMART Board Interactive Whiteboard (click here for more info)
• LCD TV monitors
• Ability to connect a presenter's laptop
 

• Seats 24
• Tables and chairs (non-movable)
Light switches by door & behind lectern
Internet and network access
Phone (wall-mounted behind lectern)
• Whiteboard (hallway wall)


Powering Up the Equipment
The equipment is controlled from the lectern using a Crestron Touch Panel Interface.
  

Click on the image below to zoom   Click on the image below to zoom
 
Instructor's lectern   Crestron Touch Panel


If the touch panel's screen is black, touch the screen to wake the display. When the Canisius Logo Screen appears, tap the screen and enter the required Access Code (63520).  

 


After successfully entering the Access Code, the equipment will power-up and the Crestron will display the message "Please Wait...LCD Projector Warming-up." Once the projector is ready, the Crestron will display the Main Menu, further identifying the function of the hard-buttons.

 


The resident computer and lectern monitors are powered on using the appropriate button located on each device.


Room Lighting Controls
Simply press the LIGHTS button on the Crestron to display the appropriate touch-screen controls.  

Click on the image below to zoom
 

Touch-buttons are provided which allow you to select different lighting presets for the room. Wall plates by the main door and behind the lectern can also be used to control the lights. A third wall plate, located next to the Crestron on the lectern, controls the podium spotlight.


Projector Standby (PIC-MUTE)
Each source page (COMPUTER, LAPTOP, BLOOMBERG PC, etc.) has a Projector Standby button located in the lower left corner of the screen.
Pressing this button once will place the projector in standby (or pic-mute) mode. While this mode is active, the button will flash. Simply press the button again to take the projector out of standby mode.


Volume
Each source page (COMPUTER, LAPTOP, BLOOMBERG PC, etc.) has a volume control section located on the right side of the screen. Volume up, down, and mute controls are provided.

NOTE: Computers have their own volume controls which may need to be adjusted separately.


Resident Computer @ Lectern
Press the POWER button on the resident computer to turn it on.
OM 111 is equipped with a HP computer. USB ports are located next to the computer's power button.

Once the computer has been powered up, press the COMPUTER button on the Crestron to display the appropriate touch-screen controls.

The computer in this classroom is setup with dual lectern monitors so that faculty can use an extended desktop, which allows for more screen real estate. The left lectern monitor shows the extended desktop, while the right monitor is the main desktop. In addition to displaying either the main or extended desktop image on the projector, touch-buttons are provided on Crestron which allow you to display the image on either the lower left TV or lower right TV on either side of the SMART Board Interactive Whiteboard.

Click on the image below to zoom   Click on the image below to zoom
 
The computer is located on
the left shelf of the lectern
   

SMART Board Interactive Whiteboard
The SMART Board Interactive Whiteboard is connected for use with the room's resident computer. After logging in to the computer, press the COMPUTER button on the Crestron. The SMART Board software will automatically load after you log in to the computer.

Click here for more information regarding the SMART Board Interactive Whiteboard found in this classroom.

Please Note: The ability to write on the SMART Board only works when the Main Desktop is selected for display on the LCD projector.


Powering the LCD TV Monitors On/Off
Simply press the MONITOR POWER button on the Crestron to display the appropriate touch-screen controls.

Click on the image below to zoom


Touch-buttons are provided which allow you to power each TV on and off from the CrestronThe Upper Right TV should always stay on, as it provides the image for the TV located in the hallway just outside of Old Main 111. If this TV is turned off, the hallway TV will display a blue screen with a "No Signal" message.

NOTE: This room is configured so that the TVs are on by default. If the TVs have been turned off during room use, they will power back on when the room is shut down.


Watching Cable TV on the LCD TV Monitors
Press either the BOTTOM LEFT TV or BOTTOM RIGHT TV button on the Crestron to display the appropriate touch-screen controls for that TV.

Click on the image below to zoom   Click on the image below to zoom
 


Touch-buttons are provided which allow you to select your channel and adjust the TV volume from the Crestron. If another image (resident computer, Bloomberg Terminal, or laptop image) is displaying on the TV, press the Select TV Tuner button to display campus cable on that TV.


Connecting a Laptop
The cables needed for connecting a laptop computer are found on the instructor's lectern. In addition to cables for connecting a laptop, a power outlet is also located on the lectern for your convenience.

Using the VGA cable   Using the HDMI cable
     
1. Plug the VGA cable into your laptop's VGA port. 1. Plug the HDMI cable into your laptop's HDMI port.
   
2. Plug the Ethernet cable into your laptop's network jack (if needed).  2. Plug the Ethernet cable into your laptop's network jack (if needed).
    
3. Plug the audio cable into your laptop's headphone jack.  3. Press the LAPTOP button on the Crestron to view the "Laptop" screen.
    
4. Press the LAPTOP button on the Crestron to view the "Laptop" screen. 4. Press the "Digital (HDMI) Laptop" touch-button.
   
5. Press the "Analog (VGA) Laptop" touch-button. 5. Turn on your laptop's power.
   
6. Turn on your laptop's power. 6. If needed, set your laptop to display on a secondary display.
   
7. If needed, set your laptop to display on a secondary display.  
   
Click on the image below to zoom


In addition to displaying the image on the projector, touch-buttons are provided which allow you to display the image on either the lower left TV (Send to Bottom Left) or lower right TV (Send to Bottom Right) on either side of the SMART Board Interactive Whiteboard.

Don't have a VGA or HDMI port on your laptop? Visit Training & Support to find out what type of adapter is needed to connect your laptop.


Powering Down the Equipment
Press the SHUTDOWN button on the Crestron to display the appropriate touch-screen controls. Press the "Yes, Shutdown" button to proceed with shutdown or the "No, Go Back" button to cancel.

 


The resident computer is powered off separately. Instructions for shutting down the computer are found below.

Be sure to remove any media from the equipment before shutting it down.


NOTE: This room is configured so that the TVs are on by default. If the TVs have been turned off during room use, they will power back on when the room is shut down.


Powering Down the Resident Computer Powering Down the Resident Computer

Minimize

1. Open the Start Menu (click on in the lower-left corner).

2. Click the "Shut Down" button.


Staging Enabled